160 GPH Dominator In-Line Billet EFI Fuel Pump Kit (Up to 1600 HP N/A or 850 HP Boosted on Gasoline at 13.8V)
- Recommended Single -12 AN line Inlet
- 10 AN O-ring inlet/outlet for high flow and superior sealing
- Compatible with 12v to 18.5v systems for street or race use
- Compact (7.66” Long x 5” Wide x 2.5” Tall) for easy installation on frame rails or other tight areas
- Twin pump design allows the use of both pumps simultaneously or independently - second pump can be activated on demand for power adders such as nitrous or boost
- Weighs only 5.1 lbs.
- Max Current draw is 28 Amps
- These pumps do not have an internal bypass. A bypass style regulator is included in kit.
- NOT FOR USE WITH METHANOL!
- Regulator has 1) -10 an o-ring inlet, (1) -10 an o-ring outlet, (1) -8 an o-ring return
- Regulator has 1/8" NPT gauge port
- Filters measure 5.5” long and 2” diameter each
- Filters have female 12AN O-ring inlet and outlet
- 100 Micron Pre Filter and 10 Micron Post Filter
This pump is not designed to use a standard conical seat style union in the inlet or outlet of the pump. Example: Part # AT981510ERL. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as :Part # AT985010ERL.